Yes the MaxTrax Xtreme Recover Boards part # MA24FV will work great in extreme cold weather with a 3,500 dually. These aren't a cheap traction device like you have most likely messed with in the past. These are very well made to withstand a lot of punishment and provide great traction. view full answer...
Yes, the Maxtrax Xtreme Recovery Boards # MA74FV will allow you to replace the Teeth # MA23PR. To replace these you will need the Traction Teeth Tool # MA63PR which we do offer as a Kit # MA55PR as well. view full answer...
Trailer Valet will officially state that the # TVXL2 should only be used on concrete/asphalt and not on gravel or dirt applications since like you have found out the traction just isn't good enough and the wheel will spin.
So while there isn't an exact method we can recommend I would try what you mentioned. I think the board solution would be the easiest and most effective so I would start there. The wood would provide much better traction than dirt. Also in the event there's rain the... view full answer...
The Maxtrax MKII Recovery Boards # RR33QP don't have a weight capacity as they will be able to handle the weight of any vehicles needing to use them. When you start to get into really big rigs that get stuck, those things need a recovery team as opposed to just some traction boards. view full answer...
The only running board options we currently offer for a 2021 Honda Pilot are from Aries and DeeZee, the AeroTread Running Boards part # AA2061029 are what I recommend. They feature a bolt-on install with sleek black finish. The 5" wide step offers plenty of grip and traction for easy in and out. They are made of aluminum so they won't rust. view full answer...
I do have similar running board options for your 2015 Ford F-550 Crew Cab but the DeeZee Brite-Tread Running Boards part # DZ2053 are not a confirmed fit. I have attached a list of running boards that are a confirmed fit for your F-550 but out of these options, I recommend the Aries RidgeStep Running Boards part # AA2055524. These running boards are the most similar option we have to the DeeZee Brite-Tread that will fit your F-550.
The Aries running boards have a 6-1/2" wide platform,... view full answer...
The best step solution for your 2024 Ram 2500 Mega Cab is the Aries RidgeStep Running Boards w/ Custom Installation Kit # AA2055536.
I really like this setup because it's a custom fit so no drilling into your truck, plus this is a solid running boards with treads on the surface that do a fantastic job at providing traction as well as helps to drain some of the water and debris that will accumulate on them.
I've attached a review video for you to reference! view full answer...
For your 2024 Ram ProMaster 2500 I recommend the Aries RidgeStep Running Boards w/ Custom Installation Kit # AA2055539. These have a 6-1/2" wide step with stamped steel tread for traction. They also have a textured black powder coat finish which gives it a non-slip surface. The RideStep has a bolt-on installation so no drilling is required. view full answer...
The molded panel on the 2012 Toyota 4Runner is standard with the trim package of the Limited 4Runner. The boards available that fit the Limited will fit below that panel in your photos.
I recommend to use the Westin Sure-Grip Running Boards w/ Custom Installation Kit part # 27-6120-1945 which fits the 2012 Toyota 4Runner Limited and has a wide 6" step for extra traction. They are also brushed aluminum for rust Resistance and they look nice.
You can also add the Westin LED Light Kit for... view full answer...
I do have a solution for you, however the Westin Molded Running Boards # 27-0020-1725 referenced in your question are not designed to fit your 2011 Toyota Tundra Double Cab. As you mentioned, these particular running boards are compatible with the CrewMax model.
For your double cab, I instead recommend the Westin Molded Running Boards # 27-0010-1725. These are essentially the same style and design as the running boards you were looking at but they include hardware that is custom designed... view full answer...
The widest running boards or nerf bars that fit your 2018 Ford F-250 Super Duty Crew Cab are 7 inch wide, with options from both Westin and DeeZee. While the DeeZee are labeled running boards and the Westin are labeled nerf bars, they are the same, cab-length step that provides the widest possible space.
The biggest difference between the two is that the Westin is a more traditional step with a step pad, while the DeeZee is a grated surface for a more rugged look and traction. The fits... view full answer...
There is a really nice option for a wide running board that fits your 2022 Chevy Silverado 3500 Crew Cab, which is from Aries:
- Aries RidgeStep Running Boards # AA76ZB
The RidgeStep # AA76ZB are 6-1/2 inches wide, which is amount the widest possible running boards for your '22 Silverado. The only wider is the 7 inch wide DeeZee Rough Step Running Boards # DZ15321A-15340, but I do recommend going with the Aries running boards.
That 1/2 inch can't make up for the strength of the Aries... view full answer...
The DeeZee NXc Running Boards part # DZ16201-16241 for black or part # DZ16202-16241 for chrome is an excellent option for a 2014 Jeep Grand Cherokee Overland. In fact, they are the only USA options we have for this vehicle. The DeeZee NXc Running Boards have a nice and tight fit under the rocker panel so you don't have to worry about them reducing ground clearance and they have a nice wide base for traction. view full answer...
For your 2012 Mercedes Benz Sprinter I recommend the Aries RidgeStep Running Boards # AA86ZB. This comes with a full length 96" long 6-1/2" wide running board for the passenger side, and a 36" long board for the driver side. The steps themselves are a powder coated steel with punched holes and steel treads for traction. Custom install kit is included. This will be the only full length bar we offer for your vehicle. We do not have anything that would have full length on both sides. view full answer...
I have a solution for you. Running boards and mounting hardware are customized to fit different year/makes/models of vehicles. The brackets are also customized to fit certain models of running boards. With that being said, there might not be mounting hardware available for each running board we carry that is confirmed to fit your vehicle.
Currently, the only running boards/mounting hardware combination we carry that is customized to fit your 2021 Nissan Murano is the DeeZee NXc Running... view full answer...
Both vehicle running boards and their corresponding mounting hardware are vehicle specific. This means that even if you have the correct mounting hardware for your 2001 Ford F-150, running boards that are designed to fit a different vehicle will not be compatible with the truck.
For Westin E-Series Running Boards that are confirmed to fit your F-150, I recommend the Westin # 23-1885, which will include the necessary hardware. These 3 inch diameter bars will sit in recessed areas of the... view full answer...
The running boards for a 2020 Ram 2500 and 1500 are different fits so you'll need new nerf bars for the 1500.
I recommend checking out the Westin Grate Step Nerf Bars with Custom Install Kit # 27-74755-2245 for your Ram 1500 because of the "grated" style on top which gives you great traction, especially in muddy and snowy situations.
Attached is a review video of these nerf bars as well as a link to our selection of nerf bars for your 2020 Ram 1500 for you to filter through. view full answer...
Yes, we do have some all black wheel-to-wheel running boards for a 2024 Ram 3500 Crew Cab SRW 8' bed. We have the Westin HDX Nerf Bars # WE87FR and the Westin PRO TRAXX # WE99FR.
The PRO TRAXX # WE99FR are your standard 5" tube running boards. They have a glass black finish and each bar has 3 polymer plastic step pads.
The Westin HDX Nerf Bars # WE87FR are the other option and my favorite of the two. These have a drop-step design which creates a more seamless look with the body of the... view full answer...
Go To Results